Waste and Storage Bins

Type: SMB Storage Boxes

A heavy duty Storage Box, the SMB is designed for secure handling of heavy weight components/ parts in and around your workshop or during transport.

When equipped with optional lockable Lid the SMB Storage Box is a perfect storage place for all your on-site tools and smaller equipment. The Lid is available for the SMB-1150 Storage Box on request.

The SMB can be transported by Forklift or Crane, and is perfectly stackable up to 4 high.

SPECIFICATIONS:

• Safe Working Load (SWL): 1500kg
• Stackable
• Available in 2 Sizes

 

Type	Volume (litres)	Unit weight (kg)	Dimensions (mm)	Lid Supplied
SMB-750	158	58	750 x 750 x 620 High	NO
SMB1150	580	113	1150 x 1150 x 780 High	NO
SMB-1150-L	580	152	1150 x 1150 x 780 High	YES

---

 

Forklift Tipping Bins

Type: CFS6 Tipping Bin

Click to enlarge

Light weight and cost effective bin suitable for goods transport, storage or waste. Fitted with forklift carriage, these bins are designed for manual push over. Wheels are fitted as standard, 2 front and 1 swivel at the rear. Drain plug fitted as standard. Zinc plate finish.

SPECIFICATIONS:

• Safe Working Load: 350kg
• Volume Capacity: 0.31cu m
• Unit Weight: 65kg
• Pocket size 140 x 65mm
• Pocket Centres 367mm

 

---

Type FSB Tipping Bin

A light weight and cost effective bin suitable for goods transport, storage or waste. Manufactured from 2 mm plate and is available in either painted or galvanised finish.

Fitted with a forklift carriage these bins are designed for manual push over. Wheels fitted standard two front and one rear.

• Fork Pocket Size: 160 mm x 65 mm
• FSB6 Fork Pocket Centres: 300 mm
• FSB9 Fork Pocket Centres: 640 mm

Options Available:

• Crane Lugs
• Drain Valve & Strainer

---

Type NSD Tipping Bin

Type NSD Self Dumping Waste Bins provide an economical solution to collecting and disposing of industrial waste. During transport the forklift tines are positioned fully under the bin ensuring the forklifts full lifting capacity is utilised.

To empty the bin the operator places the front feet of the bin inside the edge of the bulk dumpster then drive backwards until the tines clear the pivot point and then raise to allow the bin to tip forward. Available in either painted or galvanised finish.

• Safe Working Load: 1000 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres:
  • NSD6: 381 mm
  • NSD9 - NSD18: 635 mm

Options Available:

• Crane Lugs
• Drain Valve & Strainer
• Cat Iron or Rubber Wheels

 

---

Type SSD Tipping Bin

A low profile compact bin for user in confined areas. Well suited to production machinery such as punching machines for the collection of slugs etc. Heavy duty construction with self dumping ability, the forklift operator empties the bin without leaving the drivers seat. Available in either painted or galvanised finish.

• Safe Working Load: 1000 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 405 mm
• Bin Width: 710 mm

Options Available:

• Crane Lugs
• Drain Valve & Strainer
• Cast Iron or Rubber Wheels

 

SDD 4 + Wheels		SSD 6 Stacked

---

Type: JSD Tipping Bins

These are bulk capacity bins for heavy waste with models available up to 5.4 cubic metres. Manufactured from 5 mm plate and channel reinforcement , these bins have an SWL of 3000 kg

The JSD bins are fitted with oversize fork pockets to suit large forklifts. They are a self dumping bin with the operator not having to leave the drivers seat during the tipping cycle. Enamel paint finish.

• Safe Working Load: 3000 kg
• Fork Pocket Size: 180 mm x 80 mm
• Fork Pocket Centres: 950 mm

Options Available:

• Crane Lugs
• Drain Valve & Strainer

Type	Capacity (cu. m)	Width (mm)	Length (mm)	Height (mm)	Unit Weight (kg)
JSD 18	3.2	1910	1900	1125	850
JSD 24	4.3	2510	1900	1125	950
JSD 30	5.4	3110	1900	1125	1050

 

---

Type CSD Tipping Bin

The economical type CSD Tipping Bin is a self
dumping bin suitable for most waste handling
applications. This bin is supplied standard with 4 crane lugs and
upending lugs.

It is also fitted with drain plug and wheel brackets (wheels not supplied unless ordered). Being a nesting bin, it uses minimum of space for storage and transport.
Available in either painted or galvanised finish.

• Safe Working Load: 1500 kg
• Crane Lugs
• Drain Plug

Options Available:

• Rubber or Cast Iron Wheels

Type	Capacity (cu. m)	Width (mm)	Length (mm)	Height (mm)	Fork Pocket Size (mm)	Fork Pocket Centres (mm)	Unit Weight (kg)
CSD 9	0.95	1010	1570	1010	185 x 75	380	180
CSD 12	1.25	1310	1570	1010	185 x 75	680	205

 

CSD 12 + Wheels

CSD 12 Stacked

---

Type NTU Tipping Bins

The NTU heavy duty tip up bin is manufactured from 3 mm plate and is fitted with fully reinforced edges. These bins are ideally suited to heavy waste including metal, timber and building site rubble.

The release mechanism is activated by the forklift operator pulling the pull chord from the driver's seat. The custom built shock absorber prevents impact forces being transmitted to the forklift during emptying. Available in either painted or galvanised finish.

• Fork Pocket size: 165 mm x 65 mm
• Fork Pocket Centres: 635 mm (NTU 6 - 405 mm)
• Safe Working Load: 1000 kg

Options Available:

• Crane Lugs
• Cast Iron or Rubber Wheels
• Drain Cock & Strainer

 

NTU 12 Tipped

NTU 18

---

Type TU Tipping Bin

The TU bin is manufactured from 3 mm plate and has a lower profile which allows more versatility in confined areas. The pouring lip and smooth formed edges make this bin ideal for food industry applications.

The release mechanism is activated by the forklift operator pulling the draw rope from the driver's seat. The custom built shock absorber prevents impact forces being transmitted to the forklift during emptying. Available in either painted or galvanised finish.

• Fork Pocket size: 165 mm x 65 mm
• Fork Pocket Centres: 635 mm (TU6 - 405 mm)
• Safe Working Load: 1000 kg

Options Available:

• Crane Lugs
• Cast Iron or Rubber Wheels
• Drain Valve & Strainer

 

Type	Capacity (cu. m)	Width (mm)	Length (mm)	Height (mm)	Unit Weight (kg)
TU6	0.5	700	1400	915	185
TU9	0.75	1000	1400	915	200
TU12	1.0	1300	1400	915	215
TU15	1.25	1600	1400	915	240
TU18	1.5	1900	1400	915	260

 

---

Type JTU Tipping Bin

A large bin for bulk capacity the JTU bin is manufactured from 3 mm Plate and fitted with strengthening ribs. The release mechanism is activated by the forklift operator pulling the draw rope from the driver's seat. Powerful shock absorbers prevent impact forces being transmitted to the forklift during emptying. Available in either painted or galvanised finish.

• Fork Pocket size: 165 mm x 65 mm
• Fork Pocket Centres: 735 mm
• Safe Working Load: 1000 kg

Options Available:

• Crane Lugs
• Cast Iron or Rubber Wheels
• Drain Valve & Strainer
• Plastic Lids for JTU 18 only

 

---

Type ROB Rollover Bin

The ROB bin has a smooth tipping action with minimal impact when emptying. The cut away front lip makes this style of bin ideal for tipping liquid product. To tip the operator simply pulls the handle via a draw rope without leaving their seat. Available in either painted or galvanised finish.

• Fork Pocket size: 165 mm x 65 mm
• Fork Pocket Centres: 625 mm
• Safe Working Load: 1000 kg

Options Available:

• Crane Lugs
• Cast Iron or Rubber Wheels
• Drain Valve & Strainer

 

 

ROB9 + wheels + crane lugs

ROB15

---

Type SROB Roll Sideways Bin

Sideways discharge bin with the ability to tip in either direction. Fork pockets are provided for end or sideways lifting and tipping. This bin is ideally suited to the food industry. Available in either painted or galvanised finish, Stainless Steel on request. Wheels fitted as standard.

• Safe Working Load: 600 kg
• Fork Pockets: 140 mm x 60 mm
• End Fork Pocket Centres: 450 mm
• Side Fork Pocket Centres: 660 mm

Options Available:

• Crane Lugs
• Drain Plug

Type	Capacity (litres)	Width (mm)	Length (mm)	Height (mm)	Unit Weight (kg)
SROB 9	450	700	1200	1075	150
SROB 12	600	700	1500	1075	170

 

Sideways Tipped

Lever Release

Forward Tipped

---

Drop Bottom Bins

Type: DB Drop Bottom Bins

The DB Drop Bottom Bin is a heavy duty unit manufactured from 3 mm plate and is reinforced to handle all types of solid waste product.

Able to be transported by either forklift or crane. Emptying is carried out by pulling the draw rope handle which allows the floor to drop open from one side, allowing complete emptying. Shock absorbing system removes all impact from forklift or crane during emptying. Enamel painted finish.

• Fork Pockets: 160 mm x 65 mm
• Fork Pocket Centres: 684 mm
• Safe Working Load: 1000 kg

Options Available:

• Cast Iron or rubber Wheels

Type	Capacity (Cu. m)	Width (mm)	Length (mm)	Height (mm)	Unit Weight (kg)
DB 500	0.5	1200	1025	745	200
DB 800	0.8	1200	1025	1045	225
DB 1100	1.1	1200	1025	1345	250

 

DB 1100

DB 800 + Wheels

---

Hopper Bins

Type: HB Hopper Bins

The HB Hopper Bin has a unique “Clam Shell” opening mechanism and is available in three models with different volume capacities as detailed in the table below. The bin is fitted with Forklift pockets and is stackable 2 high. Enamel paint finish.

• Fork Pocket size: 160 mm x 65 mm
• Fork Pocket Centres: 625 mm
• Safe Working Load: 1000 kg

Options Available:

• Crane Lugs
• Wheels

Type	Capacity (cu. m)	Width (mm)	Length (mm)	Height (mm)	Unit Weight (kg)
HB1-5	0.5	1120	1120	1350	200
HB1-10	1.0	1120	1120	1750	250
HB1-15	1.5	1120	1120	2150	300

 

HB1-15 + Wheels

Clam Shell Gate

---

Crane Bins

Type: SCB Crane Bins

Heavy duty bins suitable for all waste products. Space saving shape allows bins to nest inside each other for transport and storage. Available in 1 tonne capacity made from 3 mm plate or 2 tonne capacity made from 5 mm plate. Bins are fitted with 2 way entry fork pockets allowing for emptying with forklifts fitted with rotator as well as being fitted with crane lugs and upending lugs for emptying by crane. Available in either painted or galvanised finish.

Options Available:

• Cast Iron or Rubber Wheels
• 4 Way Entry Pockets

Type	Fork Pocket Size (mm)	Fork Pocket Centres (mm)	Capacity (cu. m)	SWL (kg)	Width (mm)	Length (mm)	Height (mm)	Unit weight (kg)
SCB112	165 x 65	585	0.75	1000	1200	1230	895	150
SCB115	165 x 65	865	1.25	1000	1500	1230	1095	180
SCB121	165 x 65	865	1.80	1000	2100	1230	1095	230
SCB212	165 x 65	585	0.75	2000	1200	1230	895	220
SCB215	165 x 65	865	1.25	2000	1500	1230	1095	290
SCB221	165 x 65	865	1.80	2000	2100	1230	1095	380

 

SCB 212

SCB with lugs

Crane Emptying

Forklift Emptying

---

Type SSC Crane Bins

A heavy load capacity storage bin suitable for all manufacturing and construction sites. This versatile bin can be moved by crane, forklift or hand pallet truck.

Fitted with four way forklift pockets and corner crane lifting lugs, these bins can be stacked 4 high. The bin can be emptied by crane or a forklift fitted with carriage rotator.

Bins have corner drain holes and are available in either painted or galvanised finish.

Options Available:

• Cast Iron or Rubber Wheels (not stackable)
• No Drain Holes

Type	Capacity (cu. m)	SWL (kg)	Width (mm)	Length (mm)	Height (mm)	Unit Weight (kg)
SSC400	0.4	2000	1250	1250	475	200
SSC800	0.8	2000	1250	1250	775	220
SSC1000	1.0	2000	1250	1250	925	240
SSC1200	1.2	2000	1250	1250	1075	260

 

4 Way Pockets

SSC 1000

SSC 800

---

Type BWB Bulk Waste Bin

The BWB Bulk Waste Bin is ideal for building and mining sites using overhead cranes. This bin is available in three different sizes up to a maximum capacity of 14 tonne SWL. Enamel paint finish.

Note: BWB 50 supplied with lifting chains.

Type	Capacity (cu. m)	SWL (kg)	Width (mm)	Length (mm)	Height (mm)	Unit Weight (kg)
BWB 15	1.5	3000	1500	1800	830	560
BWB 30	3.0	5000	1500	2400	905	825
BWB 50	5.0	14,000	2400	3000	960	2560

BWB 30

BWB 15

---

Type CB 20 Crane Bin

The CB 20 bin is a heavy duty bin suitable for products such as sand, gravel, excavation waste and scrap metal.

The bin comes standard with 6 crane lugs for crane operation and fork pockets are fitted for transport. Enamel paint finish.

Refer to table for full specifications.

• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 725 mm

Type CB 30 Crane Bin

With a larger capacity, the CB 30 has a higher safe working load.

Refer to table for full specifications.

• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 725 mm

---

Type CB 50 Crane Bin

Manufactured from 6 mm plate and reinforced with additional bracing, the CB 50 is an extremely heavy duty bin for large capacity volumes. Enamel paint finish.

Refer to table for full specifications.

• Fork Pocket Size: 185 mm x 85 mm
• Fork Pocket Centres: 950 mm

 

Type	Capacity (cu. m)	SWL (kg)	Width (mm)	Length (mm)	Height (mm)	Unit Weight (kg)
CB 20	1.25	2000	1170	1924	905	310
CB 30	1.90	3000	1330	2155	1045	390
CB 50	2.0	5000	1660	2495	905	720

---

Type NCB Crane Bin

A stackable bin designed for crane lifting and emptying. The stack legs allow for easy handling by forklift. Available in either painted or galvanised finish.

• Safe Working Load: 1000 kg

Available Options:

• Cast Iron or Rubber Wheels
• Drain holes
• Fork pockets

---

Type CPB 6 Crane Bin

A compact, heavy duty stackable bin ideal in machine shops and foundries for component storage. Manufactured from 3mm plate and fitted with crane lugs, these bins are easily moved by Crane or Forklift. Available in either enamel painted or galvanised finish.

• Capacity: 0.23 cubic metres
• Safe Working Load: 1000 kg
• Unit Weight: 80 kg
  

Available Options :

• Cast Iron and Rubber Wheels

---