Lifting Magnets

"EASYLIFT" MAGNETIC LIFTER FOR STEEL PLATES AND BARS

MODEL	DIMENSION (mm)			Weight (Kg)	Capacity (kg)
	Width	Length/w/switch	Height/w/eyebolt		Flat	Round/Dia. (mm)
KRE-15	102	85/102	119/179	7	150
KRE-30	154	95/128	119/179	14	300
KRE-50	184	115/148	149/220	21	500
KRE-80	242	115/158	175/265	35	800
KRE-100	263	115/158	199/309	44	1,000
KRE-12/10	102	85/102	119/179	7	120	100/160
KRE-25/20	154	115/148	119/179	15	250	200/200
KRE-45/30	184	135/168	149/220	25	450	300/200
KRE-75/50	242	135/178	175/265	40	750	500/300
KRE-95/70	263	135/178	199/309	50	950	700/300

 

How to select a right model - weight of work-piece

Appropriate EASYLIFT model is determined by the capacity of model and the weight of work-piece.
The weight of work-piece depends upon it's volume in thousands of shapes. 1 liter of steel (10X10X10 cm) weighs roughly 7.85 kg.

Ex.:   3 cm (thickness) X 100 cm X 150 cm = 45,000 cubic cm = 45 liter

7.85 kg (weight per liter) X 45 (liter) = 353.25 kg
For this work-piece, depending upon the character of steel alloy, KRE-50 or KRE-80 can be selected.
Other factors shown on the graphs below should be considered too.

 

MODEL	DIMENSION (mm)			Weight (Kg)	Capacity (kg)
	Width	Length/w/switch	Height/w/eyebolt
KPL-150	353	234/284	265/375	118	1,500
KPL-200	353	311/388	275/402	166	2,000
KPL-250	353	389/466	270/402	208	2,500
KPL-300	353	466/543	270/402	244	3,000
KPL-350	353	544/621	270/402	280	3,500
KPL-400	353	621/698	273/424	328	4,000
KPL-450	359	699/776	273/443	379	4,500
KPL-500	359	776/853	277/447	424	5,000
KPL-600	722	584/768	275/458	643	6,000
KPL-800	722	739/923	275/479	808	8,000
KPL-1000	722	894/1,078	275/509	968	10,000
* Models over 5 tonnage are constructed in double columns and are equipped with shackle instead of eyebolt.

 

Conditions and characters of work-piece to be checked

Adhesive Force varying according to Steel Alloy
SUS403	77%	Click to enlarge graphs
SUS430	50%
SC42	95%
SKD11 (H.T.)	40%
SKD11	75%
FCD600	85%
FCD400	85%
FC350	75%
FC250	75%
FC150	75%
SCM440	95%
SCM415	95%
S45C (H.T.)	80%
S45C	95%
S20C	100%
SS400	100%
H.T. stands for heat-treated.

---

---

KPL 1000 "EASYLIFT" LIFTING MAGNET

Lifting Capacity 10,000 Kg

Handle folds at right angles to the side of magnet and inside "crash bar" (This is to prevent damage to handle)

Handle extended (as shown in photo) for ease of operation the (Crash Bar) can be used by operator to guide magnet into position.

---

"EASYLIFT" MAGNETIC MULTI-PURPOSE MACHINE LOADER KRE 75/50 MP

Magnet KPL 40 - 400 kg lift (test load 1200 kg) Attachment tested to 800 kg recommended max. Lift to vertical position 150 kg.
Note: Quick operating adjuster to suit various loads (left hand side). Safety stop adjustable to suit load size (right hand side). Steel block shown 171 kg. >>
Click images to enlarge them.

<< Illustrates lifter in operation.
Note: Quick action adjustment pin at rear of adjustment plate (left hand side).
Hole positions in adjustment plate alter centre of gravity of total load.

Steel block shown in vertical position ready to be placed in chuck. >>
The extended lever is used to guide load into chuck.
Note: See load chart for block size details for
KRE 75/50MP (Vertical Lift 200 kg max.)
KPL 40/MP (Vertical Lift 150 kg max.)

---

"EASYLIFT" MAGNETIC MULTI-PURPOSE MACHINE LOADER KRE 160 MP

Magnet KRE 160 1600 kg lift (test load 5000 kg) Recommended max. lift to vertical 500kg
Adjustable arm (left side of magnet) Hole positions in adjustable arm alter centre of gravity for total load.
(To suit various loads including magnet) >> Click images to enlarge them.

<< Adjustable stop (right side of magnet) (to prevent slip of work piece)
Magnet is "on" (see handle position) This is the reverse to standard position for a standard magnet (It is designed to clear floor during lifting)

Steel block shown in position ready to be placed in chuck. The extended handle (See black knob) is used to guide load into chuck. >>

---

Click to see the "EASYLIFT" AUTOMAG LIFTING MAGNETS

Click to see Permanent Magnetic Lifter BML Series