Lifting Equipment

Permanent Magnetic Lifter

Model: BML Capacity from 100kg to 2 tonne - Complies to AS4991:2004

Permanent Magnetic Lifter BML

The Permanent Magnetic Lifter is a new concept product for lifting and handling steel plate, pipes, beams and cylindrical work pieces of ferromagnetic materials. The Magnetic Lifters contain a NdFeB permanent magnet, which can generate high holding-power in a magnetic circuit. With the use of a magnetic lifter the need for slings, clamps and special lifting frames can be eliminated. They are compact in design and construction, convenient in operation with a strong holding force, are safe and reliable. These magnetic lifters are widely used for lifting and hoisting in factories, warehouses, on wharves and at transport facilities.

FEATURES:

Due to the high magnetic properties of the magnetic lifter the relevant size of the unit is smaller compared to other products with the same lifting capacity.
As the magnetic lifter is not electrically operated, accidents due to sudden power failure are avoided, the magnetic lifter can also be used outdoors or on site without the need for a power supply.
There are ‘V’ slots incorporated into the holding face allowing it to be used to lift pipes or round bar work pieces.
The special safety locking mechanism on the handle prevents the magnetic lifter from accidentally being released.
The magnetic lifter comes complete with a rated shackle that is stamped with the Working Load Limit (W.L.L.); Test No.; Serial No.; Month and Year of manufacture and the European standard compliance mark (CE).

Complies to AS4991:2004

Permanent Magnetic Lifter Technical Data

Permanent Magnetic Lifter Dimensions

SPECIFICATIONS

Model No.	BML 010	BML 030	BML 060	BML 100	BML 200
Rated Capacity*	100kg	300kg	600kg	1t	2t
A mm	28	44	56	88	115
B mm	68	93	118	164	214
C mm	62	92	122	172	230
D mm	44	59	70	100	135
E mm	28	39	44	68	98
K mm	92	164	234	264	380
L mm	50	75	110	137	192
M mm	116	142	178	237	397
N mm	42	59	87	110	150
O mm	31	46	58	95	117
Max. Handle Turning Force kgf	<4	<8	<8	<16	<16
Net Wt. kg	3	10	24	50	125
* Rated capacity is for flat steel plate only.

Warning: Flat steel and cylindrical steel have vastly different rated lifting capacities. For rated lifting capacities of flat steel and cylindrical steel refer to RATED LIFTING CAPACITIES Table below.

RATED LIFTING CAPACITIES

Model	Horizontal	Vertical	Cylindrical

BML-010	100kg	30kg	30kg
BML-030	300kg	100kg	100kg
BML-060	600kg	200kg	200kg
BML-100	1t	300kg	300kg
BML-200	2t	600kg	600kg

Working Temperature -40°C to 80°C

Warning: The above table is based on ferrous steel and must be read in conjunction with Steel Thickness and Air Gap charts opposite

Click to see the "EASYLIFT" LIFTING MAGNETS

Click to see the "EASYLIFT" AUTOMAG LIFTING MAGNETS

STEEL THICKNESS & AIR GAP CHARTS

Steel Thickness & Air Gap Charts

BML-010 Rated Capacity 100kg

Steel Thickness & Air Gap Charts

BML-030 Rated Capacity 300kg

BML-060 Rated Capacity 600kg

BML-100 Rated Capacity 1tonne

BML-200 Rated Capacity 2 tonne

Warning: The above charts are based on flat ferrous steel plate lifted horizontally.

Enquiry Form

This is a short form you can submit to request information from Active Lifting:

Please provide the following contact information
Items marked with an * are required fields.

* Name
Title
Organisation
Street Address
Address (cont.)
City
State
Postal code
Country
Work Phone
FAX
* E-mail
Web Site
Please provide the following product information you are enquiring about if known:
Product name
Type
Enter any questions you have in the box below.

When you have completed the form, please press the Submit Form button below: